LG BD530 Owner's Manual - Page 21

Installation 21 Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player's network setting to be adjusted. Adjust the [NETWORK] setting as follow. NOTE If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using vVY and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. Preparation 3. Select [OK] and press ENTER ( ) to apply network settings. Before setting the wired network, you need to connect the broadband internet to your home 4. The player will ask you to test the network network. connection. Select [OK] and press ENTER ( ) to complete the network connection. 3 1. Select [Connection Setting] option in the [Setup] menu then press ENTER ( ). 5. If you select [Test] and press ENTER ( ) at step 4 above, the network Installation connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu. 2. Use vVY to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.