LG BG5200ER Owners Manual - Page 12

Installation

Get LG BG5200ER PDF manuals and user guides View all LG BG5200ER manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installation Clearance Proper clearance enhances the cooling efficiency of the unit and prevents heat radiation of the condenser. 1. if a storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame. 2. See Figure. B. The top of the wood strip should be approximately 3/4" higher than the storm window frame (Storm Window Frame) or wood strip (Outdoors) to help condensation to drain properly to the outside. 3. install a second wood strip (approximately 6" long by 1 V2"wide and same thickness as first strip) in the center of the sill flush against the back off the inner sill. This will raise the L bracket as shown Figure. B. 4. if the distance between Storm Window Frame and Wood Strip Mounted on Top of inner Sill is more than 1", two of wood strips are not necessary. Inner S_ Wood S1rp Mounted 1° Max In lU Ou'td_rs Figure, A Figure, B i2 Room Air Conditioner

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Installation
Clearance
Proper clearance
enhances
the cooling
efficiency
of the unit and prevents heat
radiation of the condenser.
1.
if
a storm window presents
interference,
fasten a 2" wide wood strip to the inner
window
sill across the full width of the sill. The wood strip should be thick
enough to raise the height of the window sill so that the unit can be
installed
without interference
by the storm window frame.
2. See Figure. B. The top of the wood strip should be approximately
3/4" higher
than the storm window frame (Storm Window
Frame) or wood strip (Outdoors)
to help condensation
to drain properly to the outside.
3.
install
a second wood strip (approximately
6" long by 1V2"wide and same
thickness
as first strip) in the center of the sill flush against the back off the
inner sill. This will raise the L bracket as shown Figure. B.
4.
if
the distance between
Storm Window
Frame and Wood Strip Mounted on Top
of inner Sill
is
more than 1", two of wood strips are not necessary.
Inner S_
In
lU Ou'td_rs
Wood S1rp Mounted
1
°
Max
Figure,
A
Figure,
B
i2
Room
Air
Conditioner