LG CDG3389WD Owner's Manual - Page 12

Part 5 PROGRAMMING MODE 1 Programming mode You can check machine information or change setting on Program setup or Diagnostic test. There are two methods that you can enter programming mode. 2 Check the programming mode by button How to enter "Programming mode" You can enter programming mode only for Idle state and pause state. How to use button You can change Dryer vend price, cycle time and Cycle parameters, etc. - Card Type 1) Insert service card. 2) Display will show - Coin Type 1) Open the Service door. 2) Display will show Press button Description WHITES AND COLORS Move to upper level PERMANENT Move to the mode in the PRESS same level (+) DELICATES Move to the modes in the same level (-) START Enter the selected mode Coin Vault Service door Insert debit card COIN TYPE CARD TYPE Note • If you turn on the power without connecting the meter case for the first time, the machine will display . • When the machine comes from the factory, it is set in the coin type. You can change Card/Coin type by button. (For more information refer to SETUP mode's .) 12