LG DLE1501W Owners Manual - English Spanish - Page 41
Regular Cleaning
View all LG DLE1501W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ENGLISH MAINTENANCE 41 MAINTENANCE Regular Cleaning wWarning To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: • Unplug the dryer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electrical shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Cleaning the exterior Proper care of your dryer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent. Immediately wipe off any spills with a soft, damp cloth. NOTE Do not use methylated spirits, solvents, or similar products. Never use steel wool or abrasive cleansers; they can damage the surface. Cleaning the lint filter Always clean the lint from the filter after every cycle. Lint Filter To clean, open the dryer door and pull the lint filter straight up. Then: 1. F or everyday cleaning, roll any lint off the filter with your fingers, or Cleaning the interior Wipe around the door opening and seal with a soft, damp cloth to prevent lint and dust buildup that could damage the door seal. Clean the window with a soft cloth dampened with warm water and a mild, nonabrasive household detergent; then wipe dry. The stainless steel drum can be cleaned with a conventional stainless steel cleaner, used according to the manufacturer's specifications. Never use steel wool or abrasive cleansers; they can scratch or damage the surface. Cleaning around and under the dryer Vacuum lint and dust from around the dryer and underneath it regularly. Vent ductwork should be checked for lint buildup and cleaned at least once per year. If any noticeable reduction in airflow or drying performance occurs, immediately check ductwork for obstructions and blockages. Maintaining ductwork Vent ductwork should be checked for lint buildup once per month and cleaned at least once per year. If any noticeable reduction in airflow or drying performance occurs, immediately check ductwork for obstructions and blockages. Contact a qualified technician or service provider. 2. Vacuum the lint filter. 3. If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow to dry thoroughly before reinstalling. NOTE NEVER operate the dryer without the lint filter in place. NEVER operate the dryer with a wet lint filter. MFL67731056_en_150715.indd 41 2015.7.15 3:39:30 PM