LG DLE3733D Owner's Manual (English) - Page 30
Maintenance
View all LG DLE3733D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Part 9 OPERATING YOUR DRYER 4. To use a manual dry cycle • Select a Manual Dry Cycle. • Press MORE TIME or LESS TIME until the desired drying time is displayed. Tap MORE TIME or LESS TIME and the time will change by 1 minute interval. Note The MORE TIME or LESS TIME feature can be used with Manual Dry and Time Dry. • Press TEMP. CONTROL until the desired temperature indicator glows. • (OPTIONAL STEP) If desired, select OPTIONS. For more details, see Options. • Press START/PAUSE. Be sure the door is closed. • If you do not press START/PAUSE within 10 minutes of selecting the cycle, the dryer automatically shuts off. • If you wish to end your drying cycle after pressing START/PAUSE, press START/PAUSE again. To stop your dryer at any time Press START/PAUSE or open the door. 5. Pausing or restarting • To pause the dryer at any time: Open the door or press START/PAUSE. • To restart the dryer Close the door. Press START/PAUSE. Note Drying will continue from where the cycle was interrupted if you close the door and press START within 10 minutes. If the cycle is interrupted for more than 10 minutes, the dryer will shut off. Select new cycle settings before restarting the dryer. Maintenance Clean lint filter Clean the lint filter after each use and check it before use. Not cleaning or emptying the filter will increase drying time and energy consumption, therefore dryer life expectancy could be shortened after all. ■ Clean the door and its opening 1. Wipe out the door opening. Otherwise, build-ups of dirty and foreign objects will damage sealing of door. 2. Clean the transparent glass door to keep inside view clear through the glass. 30 1.Open the door and pull the filter straight up. 2.Clean the filter using one of the following methods. Run the fingers across the filter. Vacuum the lint filter. Wash the lint screen in warm, soapy water. Dry thoroughly and replace.