LG DLEX0001TM Owner's Manual - Page 39

TROUBLESHOOTING BEFORE CALLING FOR SERVICE (cont.) Problem Steam doesn't generate but no error code is shown. Garments still wrinkled after Steam Fresh™. There are no creases left on garment after Steam Fresh™. Garments have static after REDUCE STATIC. Possible Causes • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. Garments are too damp or too dry after REDUCE STATIC. Garments are not uniformly damp after EASY IRON. Water drips from door during EASY IRON. • Correct drying options not selected. • This is normal. • This is normal. Steam is not visible during Steam Cycle. Drum does not turn during Steam Cycle. Cannot see steam vapor at the beginning of cycle. • This is normal. • This is normal. • This is normal. The display shows BULKY LOAD. • MORE TIME button pressed. Odors remain in clothing after STEAM FRESH™. • STEAM FRESH™ did not remove odor completely. 2 bars are displayed in FLOW CHECK indicator COMPLETED FLOW CHECK THE DUCTWORK IS FREE FROM BLOCKAGES OR RESTRICTIONS. • Ductwork is slightly too long or has too many turns/restrictions. • Partial blockage of the ductwork due to lint buildup. 4 bars are displayed in FLOW CHECK indicator NEED FLOW CHECK THE DUCTWORK HAS A BLOCKAGE THAT NEEDS TO BE REMOVED IMMEDIATELY. • Ductwork is too long or has too many turns/restrictions. • Significant blockage of the ductwork due to lint buildup or debris. Solutions • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned immediately to remove lint buildup and other blockages. Dryer can be used, but performance and efficiency will be greatly reduced. 39