LG DLEX2901V Owner's Manual - Page 32
LG DLEX2901V Manual
View all LG DLEX2901V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CUSTOm PROGRAm If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program. a *1 To SavetheCustom Program: selector Turn on dryer and turn the cycle knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds. To Recall a Custom Program: 1 Turn on the dryer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle. STEAm FUNCTIONS To Fill the Steam Feeder 1 Pull out the drawer. 3 Fill the steam feeder to MAX with water. Water ONLY Drawer Steam Feeder M AX 2 Lift out the steam feeder. 4 Place the steam feeder in the drawer; then push in the drawer until it clicks into place. IMPORTANTNOTESABOUTSTEAMCYCLES Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, the ADD WATER light will blink. Make sure that the steam feeder is filled with water and the drawer is completely closed. Turn the dryer off then restart the Steam Cycle. • nly use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents. O • Before moving the dryer, make sure the steam feeder is empty. • Do not use distilled water; the water level sensor in the steam generator will not work. • Be careful to put the Steam Feeder otherwise water will be overflow. • Wipe up any spilled water around the Steam Feeder and the drawer before starting the dryer. wWARNING: • o not fill the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive D 32 substances. They give off vapors that could explode. • Do not fill the steam feeder with hot water (over 86°F/30°C). • Do not drink water from the steam feeder.