LG DLEX3900W Owners Manual - Page 41
Cycle Modifier Buttons, Option Buttons, Dry Level, Temp., Time Dry, Signal, Wrinkle Care
View all LG DLEX3900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Cycle Modifier Buttons Sensor Dry cycles have preset settings that are selected automatically. Manual Dry cycles have default settings, but you may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. Dry Level Use this button to select the level of dryness for the cycle. Press the Dry Level button repeatedly to scroll through available settings. ••This option is only available with Sensor Dry cycles. ••The dryer will automatically adjust the cycle time. Selecting More or Very will increase the cycle time, while Less or Damp will decrease the cycle time. ••Use a Less or Damp setting for items that you wish to iron. Temp. Use this button to adjust the temperature setting. This allows precise care of fabrics and garments. Press the Temp. button repeatedly to scroll through available settings. Time Dry Use this button to manually select the drying time, from 20 to 60 minutes, in 10-minute increments. Use this for small loads or to remove wrinkles. Use the More Time/Less Time buttons to add or reduce the drying time in 1-minute increments. Signal Use this button to adjust the volume of the end of cycle signal or turn off the signal. Press the button repeatedly until the desired volume setting is illuminated. OPERATION 41 Option Buttons The dryer features several additional cycle options to customize cycles to meet individual needs. Certain option buttons also feature a special function that can be activated by pressing and holding that option button for 3 seconds. Adding Cycle Options to a Cycle 1 Turn on the dryer and turn the Cycle selector knob to select the desired cycle. 2 Use the cycle modifier buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) to add the desired options. A confirmation message is shown in the display. 4 Press the Start/Pause button to start the cycle. The dryer starts automatically. Wrinkle Care Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to remove items from the dryer immediately. Damp Dry Signal When this option is selected, the dryer signals when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while they are still slightly damp. Energy Saver This option helps to reduce the energy consumption of the Normal Cycle, depending on the load size. When the Energy Saver option is selected, the cycle begins with an air dry section and the drying time is increased. ENGLISH