LG DLEX5101V Owner's Manual - Page 31

CYCLE OPTION BUTTONS Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function that can be activated by pressing and holding that option button for 3 seconds. To Install the Drying Rack ENGLISH To Add Cycle Options to a Cycle: 1 Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle settings buttons to adjust the settings for that cycle. 3 Press the cycle option button for the option you would like to add. A confirmation message will be shown in the display. 4 Press the START/PAUSE button to start the cycle. The dryer will start automatically. 1 With the dryer door open, slide the rack into the dryer drum. DAmP DRY BEEP With this option, the dryer will beep when the load is approximately 80% dry. This allows you to remove fasterdrying lightweight items or items that you would like to iron or hang while still slightly damp. 2 Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. NOTE: Be sure to remove the drying rack after using the RACK DRY cycle. CUSTOm PROGRAm If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program. * WRINkLE CARE Selecting this function will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer. Press and hold the DAMP DRY BEEP button for 3 seconds to activate or deactivate the WRINKLE CARE function. a *1 To SavetheCustom Program: selector Turn on dryer and turn the cycle * CHILD LOCk Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the EASY IRON button for 3 seconds to activate or deactivate the CHILD LOCK function. The lock icon will be shown in the display, and all controls are disabled except the ON/OFF button. NOTE: If the dryer is powered on again, the CHILD LOCK function stays on. To release that function, while your dryer is running, you set the CHILD LOCK function ONCE. knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds. To Recall a Custom Program: 1 Turn on the dryer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle. 31