LG DLEX5680V Owners Manual - Page 26

Special Requirements for, Manufactured or Mobile Homes, Final Installation Check

Get LG DLEX5680V PDF manuals and user guides View all LG DLEX5680V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

26 INSTALLATION INSTRUCTIONS Special Requirements for Manufactured or Mobile Homes Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and 4BGFUZ4UBOEBSET5JUMF$'3 1BSUPS4UBOEBSE $"/$4";.)BOEMPDBMDPEFTBOEPSEJOBODFT*G you are uncertain whether your proposed installation will comply with these standards, please contact a service and installation professional for assistance. t"HBTESZFSNVTUCFQFSNBOFOUMZBUUBDIFEUPUIFGMPPS t5IFFMFDUSJDBMDPOOFDUJPOGPSBOFMFDUSJDESZFSNVTU CFBXJSFDPOOFDUJPO.PSFEFUBJMFEJOGPSNBUJPO concerning the electrical connection is provided in the section Connecting Electric Dryers. t5PSFEVDFUIFSJTLPGDPNCVTUJPOBOEGJSF UIFESZFS must be vented to the outside. t%0/05WFOUUIFESZFSVOEFSBNBOVGBDUVSFEIPNFPS mobile home. Final Installation Check Once you have completed the installation of the dryer and it is in its final location, confirm proper operation XJUIUIFGPMMPXJOHUFTUTBOE*OTUBMMBUJPO5FTU %VDU $IFDL POUIFGPMMPXJOHQBHF Testing dryer heating ("4.0%&-4 Close the dryer door, press the On/Off button to turn the dryer on, and start the dryer on a heat setting. When the dryer starts, the igniter should ignite the main burner. NOTE If all air is not purged from the gas line, the gas igniter may turn off before the main burner ignites. If this happens, the igniter will reattempt gas ignition after approximately two minutes. t&MFDUSJDESZFSTNBZCFWFOUFEUPUIFPVUTJEFVTJOHUIF back, left, right, or bottom panel. t(BTESZFSTNBZCFWFOUFEUPUIFPVUTJEFVTJOHUIF back, left, or bottom panel. Gas dryers may not be vented to the outside using the right side panel because of the burner housing. &-&$53*$.0%&-4 Close the dryer door, press the On/Off button to turn the dryer on, and start the dryer on a heat setting. The exhaust air should be warm after the dryer has been PQFSBUJOHGPSNJOVUFT t5IFESZFSFYIBVTUEVDUNVTUCFBGGJYFETFDVSFMZUP the manufactured or mobile home structure, and the exhaust duct must be made of a material that will resist fire and combustion. It is recommended that you use a rigid or flexible metal duct. t%0/05DPOOFDUUIFESZFSFYIBVTUEVDUUPBOZPUIFS duct, vent, chimney, or other exhaust duct. t.BLFTVSFUIFESZFSIBTBEFRVBUFBDDFTTUPPVUTJEF fresh air to ensure proper operation. The opening for PVUTJEFGSFTIBJSNVTUCFBUMFBTUJO DN  t*UJTJNQPSUBOUUIBUUIFDMFBSBODFPGUIFEVDUGSPNBOZ DPNCVTUJCMFDPOTUSVDUJPOCFBUMFBTUJODIFT DN  and when venting the dryer to the outdoors, the dryer DBOCFJOTUBMMFEXJUIBDMFBSBODFPGJODI DN BU the sides and back of the dryer. Checking airflow Effective dryer operation requires proper airflow. The adequacy of the airflow can be measured by evaluating the static pressure. Static pressure in the exhaust duct can be measured with a manometer, QMBDFEPOUIFFYIBVTUEVDUBQQSPYJNBUFMZGU DN  from the dryer. 4UBUJDQSFTTVSFJOUIFFYIBVTUEVDUTIPVMEOPUFYDFFE JODIFT DN 5IFESZFSTIPVMECFDIFDLFEXIJMFUIF dryer is running with no load. Checking levelness Once the dryer is in its final location, recheck the dryer to be sure it is level. Make sure it is level front to back BOETJEFUPTJEF BOEUIBUBMMMFWFMJOHGFFUBSFGJSNMZPO the floor. t1MFBTFCFBXBSFUIBUWFOUJOHNBUFSJBMTBSFOPUTVQQMJFE with the dryer. You should obtain the venting materials necessary for proper installation.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
26
Special Requirements for
Manufactured or Mobile Homes
Any installation in a manufactured or mobile home must
comply with the Manufactured Home Construction and
you are uncertain whether your proposed installation
will comply with these standards, please contact a
service and installation professional for assistance.
concerning the electrical connection is provided in the
section Connecting Electric Dryers.
must be vented to the outside.
mobile home.
back, left, right, or bottom panel.
back, left, or bottom panel. Gas dryers may not be
vented to the outside using the right side panel
because of the burner housing.
the manufactured or mobile home structure, and the
exhaust duct must be made of a material that will resist
fire and combustion.
It is recommended that you use a rigid or flexible metal
duct.
duct, vent, chimney, or other exhaust duct.
fresh air to ensure proper operation. The opening for
and when venting the dryer to the outdoors, the dryer
the sides and back of the dryer.
with the dryer. You should obtain the venting materials
necessary for proper installation.
Final Installation Check
Once you have completed the installation of the dryer
and it is in its final location, confirm proper operation
Testing dryer heating
Close the dryer door, press the On/Off button to turn the
dryer on, and start the dryer on a heat setting.
When the dryer starts, the igniter should ignite the main
burner.
Close the dryer door, press the On/Off button to turn
the dryer on, and start the dryer on a heat setting. The
exhaust air should be warm after the dryer has been
Checking airflow
Effective dryer operation requires proper airflow.
The adequacy of the airflow can be measured by
evaluating the static pressure. Static pressure in the
exhaust duct can be measured with a manometer,
from the dryer.
dryer is running with no load.
Checking levelness
Once the dryer is in its final location, recheck the dryer
to be sure it is level. Make sure it is level front to back
the floor.
NOTE
If all air is not purged from the gas line, the gas igniter
may turn off before the main burner ignites. If this
happens, the igniter will reattempt gas ignition after
approximately two minutes.
INSTALLATION INSTRUCTIONS