LG DLG2102W Owner's Manual - Page 28
Cycle Setting Buttons, Custom Program - sensor dryer manual
View all LG DLG2102W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CYCLE SETTING BUTTONS SENSOR DRY cycles have preset settings that are selected automatically and cannot be changed. MANUAL DRY cycles have default settings, but you may also customize the settings using the cycle setting buttons. Press the button for that option to view and select other settings. DRY LEVEL DRY LEVEL Selects the level of dryness for the cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. • This option is only available with SENSOR DRY cycles. • The dryer will automatically adjust the cycle time. Selecting VERY DRY or MORE DRY will increase the cycle time, while LESS DRY or DAMP DRY will decrease the cycle time. • Use a LESS DRY or DAMP DRY setting for items that you wish to iron. NOTE: To protect your garments, not every dryness level, temperature, or option is available with every cycle. See the Cycle Guide for details. TEMP. CONTROL Adjusts the temperature setting from ULTRA LOW to HIGH. This allows TEMP. precise care of your fabrics CONTROL and garments. Press the TEMP. CONTROL button repeatedly to scroll through available settings. TIME DRY Allows you to manually select the drying time, from 20 to 60 minutes, in 10TIME minute increments. Use this for small DRY loads or to remove wrinkles. Use the MORE TIME/LESS TIME buttons to add or reduce the drying time in 1-minute increments. BEEPER Adjusts the volume of the end-of-cycle beeper, or turns off the beeper. CUSTOM PROGRAM If you have a special combination of settings that you use frequently, you CUSTOM PROGRAM can save these settings as a CUSTOM PROGRAM. To Save a Custom Program: 1 Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds. NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite 28 any previously saved custom program. To Recall a Custom Program: 1 Turn on the dryer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle.