LG DLG5932W Service Manual - Page 29
Remove the Cover Cabinet - dryer tub for
View all LG DLG5932W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1. Open the top plate. 2. Remove Cover Cabinet. 3. Disconnect the door lamp and electro sensor connector. 4. Remove 4 screws. 5. Disassemble the Tub Drum [Front]. -1 1. Open the top plate. -1 2. Remove the Cover Cabinet and Tub drum [front]. -2 3. Disengage belt from motor and idler pulleys. 4. Carefully remove Drum out through front of dryer. 1. Open the door. 2. Remove the screw holding the drum lamp shield in place. 3. Slide the shield up and remove. 4. Remove the bulb and replace with a 15 watt, 120 volt candelabra-base bulb. 5. Replace the lamp shield and screw. 28
28
1.
Open the top plate.
2.
Remove Cover Cabinet.
3.
Disconnect the door lamp and electro
sensor connector.
4.
Remove 4 screws.
5.
Disassemble the Tub Drum [Front].
1.
Open the top plate.
2.
Remove the Cover Cabinet and
Tub drum [front].
3.
Disengage belt from motor and idler pulleys.
4.
Carefully remove Drum out through front of dryer.
-1
-2
-1
1.
Open the door.
2.
Remove the screw holding the drum lamp shield
in place.
3.
Slide the shield up and remove.
4.
Remove the bulb and replace with a 15 watt,
120 volt candelabra-base bulb.
5.
Replace the lamp shield and screw.