LG DLG5988S Owners Manual - Page 25

4. To use a sensor dry cycle • Select a Manual Dry Cycle. • Press MORE TIME or LESS TIME until the desired drying time is displayed. Tap MORE TIME or LESS TIME and the time will change by 1 minute interval. The MORETIME or LESS TIME feature can be used with Manual Dry, Time Dry and Rack Dry Cycles. • Press TEMP. CONTROL until the desired temperature indicator glows. • (OPTIONAL STEP) If desired, select OPTIONS. For more details, see Options. • Press START/PAUSE. Be sure the door is closed. • If you do not press START/PAUSE within 10 minutes of selecting the cycle, the dryer automatically shuts off. • If you wish to end your drying cycle after pressing START/PAUSE, press START/PAUSE again. To stop your dryer at any time Press START/PAUSE or open the door. 5. Pausing or restarting To oause the dryer at any time Open the door or press START/PAUSE once. To restart the dryer Close the door. Press START/PAUSE. Drying will continue from where the cycle was interrupted if you close the door and press STARTwithin 10 minutes. If the cycle is interrupted for more than 10 minutes, the dryer will shut off. Select new cycle settings before restarting the dryer. A WARNING# Improper w_re connection or related wiring error will can cause fire or electric shock or death. gll Clean the door and its opening 1. Wipe out the door opening. Otherwise, build-ups of dirty and foreign objects will damage sealing of door. 2. Clean the transparent glass door to keep inside view clear through the glass. 1.Open the door and pull the filter straight up 2.Clean the filter using one of following ways in cases. Run the fingers across the filter , _) Vacuum the lint filter @ Wash the lint screen in warm, soapy water. Dry thoroughly and replace. 2%