LG DLG5988W Owners Manual - Page 13

Part 4 ACESSORIES INSTALLATION Stacking Kit Installation Instructions To ensure safe and secure installation, please observe the instructions below. WARNING Do not attempt installation with one person. Incorrect installation procedure can cause serious accidents and physical Injuries. The weight of the dryer and the height of installation makes the stacking procedure too risky for one person. This procedure should be performed by 2 or more experienced service personnel. 4 Secure stacking kit side bracket to the washer with a screw on the back of bracket. Repeat Steps 2, 3, 4 for the other side. 5 Place the dryer on top of the washer by fitting legs as shown in the picture. Avoid finger injuries - be careful not to pinch fingers between the washer and dryer. Slide washer slowly backwards to the stopper of kit. 1 Stacking kit Place washer firmly on a stable, even and solid floor as product installation instructions describes in owner's manual. 2 Peel protective paper off the tape from the stacking kit side bracket. 6 Insert the front stacking kit. Push the front stacking kit back to the stoppers of side stacking kit. 3 Fit the stacking kit side bracket firmly to the side of top plate by attaching the doublefaced tape to top plate as picture shows. 7 Screw both sides of the front kit. • Do not use stacking kit with a gas dryer in potentially unstable conditions like a mobile home. 13