LG DLG7188RM Owners Manual - Page 29

Problem:My Dryer Won't Start, Problem:My Dryer Displayed Error - troubleshooting

Page 29 highlights

Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. 1.Problem:My Dryer Won't Start • Is the dryer plugged in'? • Is the fuse blown, or is the circuit breaker tripped? ' Confirm that the dryer's plug is securely and Completely pushed into the laundry room's power outlet Check your home's or laundry room's fuse box/circuit breaker box and replace the fuse or reset the circuit breaker. (IMPORTANT: electric dryers generally use two fuses or breakers.) 2.Problem:My Dryer Doesn't Heat i , Is the fuse blown, Or is the Circuit breaker tripped, • Is the gas supply or service blocked or ()IT'? _m !f the tuse is blown or the Circuit breaker tripped the dryer might tumble but not heat. Check your home s or laundry room s fuse box / circuit breaker box and replace the fuse or reset the circuit breaker. (IMPORTANT: electric dryers generally . use two fuses or breakers,) Confirm that the house gas shutoff and the dryer gas shutoff are both fully ()pen. 3.Problem:There are Greasy Spots on My Clothes , Did yOUfollow the !nstmcti0n s On your fabric soflener product'? • Are you drying clean and dirty clothes together? Confirm and lb!!0w the instructions provided with Your fabric Softener product, Make sure to use your dryer to dry only clean items, because dirty items can soil clean clothes placed in the same load or later placed in the dryer drmn. , Were your clothes entir¢!y C!ean? Stains on dried clothes are actually Stains tha t werenTt cleanse d during the washing rocess please review and confirm mat you are following Your washing • instructions and that the clothes are being completely cleaned. 4. Problem:My Dryer Displayed Error !t is displayed when thermistor is not disconnected: ! n this Case, thermistor should be replaced and Calla Service Center. tE2 it is displayed when thermistor is short. In this case, thermistor should be replaced and call a service center• 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Troubleshooting
Tips
Save time and money! Review the charts
on the following
pages first and you may not need to call for service.
1.Problem:My Dryer Won't Start
• Is the dryer plugged
in'?
'
Confirm that the dryer's
plug is securely
and Completely pushed into the laundry
room's
power outlet
• Is the fuse blown, or is the circuit
Check your home's
or laundry room's
fuse box/circuit
breaker box and replace the
breaker
tripped?
fuse or reset the circuit breaker.
(IMPORTANT:
electric dryers generally
use two
fuses or breakers.)
2.Problem:My
Dryer Doesn't
Heat
i
_m
, Is the fuse blown, Or is the Circuit
!f the tuse is blown or the Circuit breaker tripped
the dryer might tumble but not
breaker tripped,
heat.
Check your home s or laundry room
s fuse box
/
circuit breaker
box and
replace
the fuse or reset the circuit breaker.
(IMPORTANT:
electric dryers generally
.
use two fuses or breakers,)
• Is the gas supply or service
Confirm
that the house gas shutoff and the dryer gas shutoff are both fully
()pen.
blocked or
()IT'?
3.Problem:There
are Greasy Spots on My
Clothes
, Did yOUfollow the !nstmcti0n s On
your
fabric soflener
product'?
Confirm and lb!!0w the instructions
provided
with Your fabric Softener product,
• Are you
drying
clean
and
dirty
Make
sure
to use
your
dryer
to dry
only
clean
items,
because
dirty
items
can soil
clothes
together?
clean
clothes
placed
in the
same
load
or later
placed
in the
dryer
drmn.
,
Were your clothes entir¢!y C!ean?
Stains
on dried clothes are actually Stains tha t werenTt cleanse d during the washing
rocess
please review and confirm
mat you are following
Your washing
instructions
and that the clothes
are being completely
cleaned.
4. Problem:My Dryer Displayed Error
!t is displayed
when thermistor
is not disconnected:
! n this Case, thermistor
should
be replaced
and Calla
Service Center.
it is displayed
when thermistor
is short. In this case, thermistor
should be replaced
tE2
and call a service center•
29