LG DLG8388NM Owners Manual - Page 25

2. Manual Dry Cycles Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the ESTIMATED TIME REMAINING display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing MORE TIME or LESS TIME. Speed Dry Use for small loads or loads that need a short drying time. Freshen Up Air Dr_ F Use this cycle to remove wrinkles from items, such as clothes packed in a suitcase or items wrinkled from being left in the dryer too long. -1!!!!!!!!!!! Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. Tim_e Button • Press MORE TIME or LESS TIME until the desired drying time is set. Time change button m available only with Manual Dry, Time Dry and Rack Dry programs. EstimatedTimeRemaining • The Display shows the estimated time remaining. In addition to this, if the dryer has some problem, it displays error messages. Status/ChecFkilter/WrinkCleareIndicator • It shows status of drying operation. When Wrinkle Care is selected, this option light will glow. When power is on, Check Filter is displayed until start/pause is selected. For better drying performance and safety, clean lint filter every single usel Child Lock Select 1. Child Lock Child Lock can be used to prevent your children from changing options on control panel while the dryer is running. When Child Lock is enabled, all the buttons will be locked and Child Lock glows. To enable Child Lock, Press and hold Rack Dry for 3 seconds, A single beep tone is heard and Child Lock is displayed on the status window. To disable Child Lock, press and hold Rack Dry for 3 seconds again. 2%