LG DLGX3002P Owner's Manual - Page 41
Steamfresh, Static.
View all LG DLGX3002P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
BEFORE CALLING FOR SERVICE (cont.) Problem Possible Causes Steam doesn't generate but no error code is shown. Garments still wrinkled after SteamFresh™. There are no creases left on garment after SteamFresh™. • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. Garments have static after REDUCE STATIC. • This is normal. Garments are too • Correct drying options not damp or too dry after selected. REDUCE STATIC. Garments are not uniformly damp after EASY IRON. • This is normal. Water drips from door • This is normal. during Steam Cycle. Steam is not visible • This is normal. during Steam Cycle. Drum does not turn • This is normal. during Steam Cycle. Cannot see steam vapor at the beginning of cycle. • This is normal. The display shows BULKY LOAD. Odors remain in clothing after STEAMFRESH™. CHECK FILTER light is on during the drying cycle 2 bars are displayed IsncrteheenL. CD END OF CYCLE • MORE TIME button pressed. • STEAMFRESH™ did not remove odor completely. • Lint filter is almost clogged or full. • Ductwork is slightly too long or has too many turns/restrictions. • Partial blockage of the ductwork due to lint buildup. 4 bars are displayed In the LCD screen. NEED FLOW CHECK THE DUCTWORK HAS A BLOCKAGE THAT NEEDS TO BE REMOVED IMMEDIATELY. • Ductwork is too long or has too many turns/restrictions. • Significant blockage of the ductwork due to lint buildup or debris. Solutions • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Pause the drying cycle and clean the lint filter. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • If "END OF CYCLE" is displayed after the end of cycle, it will be off in 4 minutes. If POWER button is pressed or the door is opened, power will be off immediately. • Install a shorter or straighter duct run. See the Installation Instructions. • Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. • If "NEED FLOW CHECK" is displayed after the end of cycle, it will be off in 2 hours. If POWER button is pressed or the door is opened, power will be off immediately. 41