LG DLGX3901W Owners Manual - Page 42
Special Functions, Rack Dry On Some Models, Control Lock, Custom PGM, Default On/Off
View all LG DLGX3901W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 OPERATION Rack Dry (On Some Models) Use the Rack Dry function with items, such as wool swearters, silk items, and lingerie, that should be dried flat. Rack Dry can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals. NOTE • NEVER tumble dry a load of clothing with the rack installed. • When the rack is installed, the drum will rotate as usual, but the rack will not move. Make sure all articles to be dried remain completely on the rack and cannot fall off or be pulled off by the turning drum. Be sure to remove the rack after use. Using the Rack Dry Cycle 1 With the dryer door open, slide the rack into the dryer drum. 2 Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. 3 Place wet items on the rack. Allow space around the items for air to circulate. 4 Close the door and select Rack Dry. 5 Press Temp. to select a temperature option. If no temperature is selected, Rack Dry defaults to no heat. Special Functions Some cycle option buttons also activate secondary functions. These special functions are marked with an asterisk (*). Press and hold the option button marked with the special function to activate it. Control Lock Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Activating the Control Lock Function Press and hold the Wrinkle Care button for 3 seconds. The Control Lock icon will be shown in the display, and all controls will be disabled except the Power button. Deactivating the Control Lock Function Press and hold the Wrinkle Care button for 3 seconds. Once set, Control Lock remains active until it is manually deactivated. Control Lock must be turned off to run another cycle. Custom PGM Save special combinations of settings that are used frequently as a custom program. Saving a Custom Program 1 Turn on the dryer and select the desired settings using the cycle selector knob and cycle modifier or option buttons. 2 Press and hold the Custom PGM button for three seconds. NOTE • Only one custom program can be saved at a time. Pressing and holding the Custom PGM button will overwrite any previously saved custom program. Recalling a Custom Program 1 Turn on the dryer and press the Custom PGM button. 2 Press the Start/Pause button to start the cycle. Default On/Off This option allows the Energy Saver settings to be changed. To run a Normal cycle without the Energy Saver option, press and hold the Energy Saver button for three seconds. ON or OFF appears in the display.