LG DLHC1455W Owners Manual - Page 34

34 SMART FUNCTIONS NOTE • LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. • The surrounding wireless environment can make the wireless network service run slowly. • If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength. • The network connection may not work properly depending on the Internet service provider. • The Wi-Fi may not connect or the connection may be interrupted because of the home network environment. • If the appliance cannot be registered due to problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again. • If the firewall on your wireless router is enabled, disable the firewall or add an exception to it. • The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) • Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. • If the security protocol of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and connect the product again. Installing the LG ThinQ Application Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application. Using the Appliance Remotely Remote Start Use a smartphone to control the appliance remotely. You can also monitor the cycle operation so you know how much time is left in the cycle. Using Remote Start 1 Put the laundry into the drum and close the dryer door. 2 Press the Power button. 3 Press and hold the Remote Start button for 3 seconds to enable the remote control function. 4 Start a cycle from the LG ThinQ application on your smartphone. NOTE • Once the function is enabled, you can only start a cycle from the LG ThinQ smartphone application. If the cycle is not started, the application will wait to start the cycle until it is turned off remotely from the application or this function is disabled. • If the door has been opened, you cannot start a cycle remotely. Disabling Remote Start Manually When the function is activated, press and hold the Remote Start button for 3 seconds. Download Cycle You can download new and specialized cycles that are not included in the standard cycles on the appliance. Appliances that have been successfully connected to a Wi-Fi network can download a variety of specialty cycles specific to the appliance. Once cycle download is completed in the appliance, the product keeps the downloaded cycle until a new cycle is downloaded. NOTE • Only one downloaded cycle can be stored on the appliance at a time. Wireless LAN Module Specifications Frequency Range Output Power (Max) 2412 - 2462 MHz < 30 dBm FCC Notice The following notice covers the transmitter module contained in this product.