LG DP132H Owners Manual - Page 18

18 Troubleshooting Troubleshooting Symptom Cause Solution No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but No disc is inserted. the unit does not work. Insert a disc. The unit does not start An unplayable disc is inserted. Insert a playable disc. (Check the disc type playback. and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly. pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit. The remote control is too far from the unit. Operate the remote control closer to the unit. There is an obstacle in the path Remove the obstacle. of the remote control and the unit. Poor picture quality Fingerprints and dust are and sound distortion. stained on the disc. 5 Wipe the disc from the center to out with a clean cloth. Do not use strong solvents. (alcohol, benzine, thinner, commercially available cleaners) No picture. The TV is not set to receive the Select the appropriate video input mode on signal from the unit. the TV. The video cable is not connected securely. Connect the video cable securely. The TV does not accept the Press RESOLUTION repeatedly to select resolution that is set on the unit. appropriate resolution. No sound. The equipment connected with Select the correct input mode of the audio the audio cable is not set to amplifier. receive the signal from the unit. The AUDIO options are set to the wrong position. Set the AUDIO settings to the correct position. Troubleshooting