LG DU-30LZ30 Owners Manual - Page 38

ExternCaol ntrDolevicSeetup 19. Color Temperature (Command2:u) I_ To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission [[k][u][ ][Set ID][ ][Data][Cr] J Data 0: Warm 1: Medium 2: Cool Acknowledgement [[u][ ][Set ID][ ][OK][Data][x] J 20. PIP Input Select (Command2:y) I_ To select input source for sub picture in PIP/Twin picture mode. Transmission [[k][y][ ][Set IU][ ][Data][Cr] I Data 0: DTV 1 : Analog 2: Video 1 3: Video 2 Acknowledgement [[y][ ][Set IU][ ][OK][Uata][x] I 21. Channel Tuning (Command: m a) I_ To tune channel to following physical/major/minor number Transmission I[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr] J Data 0: Physical channel number (Transmit by Hexadecimal code) * NTSC air: 02 ~ 45 NTSC cable: 01,0E ~ 7D ATSC air: 01 ~ 45 ATSC cable: 01 ~ 87 1 : Major channel number (Transmit by Hexadecimal code) * NTSC air: 02 ~ 45, NTSC cable: 01 ~ 7D ATSC air: 01 ~ 63, ATSC cable: 01 ~ 87 2: Minor channel number (Transmit by Hexadecimal code) * NTSC air: 00 (must be 0), ATSC: 01 ~ FE 3: High nibble --> Main picture: 0, Sub picture (PIP): 1 Low nibble --> NTSC air: 0, NTSC cable: 1, ATSC: 2, Example) If you want PIP channel tuned to ATSC cable (standard) 30-5, the command sequence is ma 00 le le 05 12. * To change the channel between ATSC air and ATSC cable, change the antenna setting with EZ Scan. Acknowledgement [[aa]][[ ]][[SSeett IIUU]][[ ]][[ONGK]][[UDaattaa00]][[Ux]atal][Uata2][Uata3][x] 1 22. Channel Add/Del (Command: I_ To add and delete the channels Transmission m b) [[m][b][ ][Set ID][ ][Data][Cr] ] Data 0: Channel Delete 1: Channe Add Acknowledgement [[bb]][[ ]][[SSeett IIDU]][[ ]][[ONGK]][[DDaattaa]][[xx]] J 23. Key (Command: m c) I_ To send IR remote key code Transmission [[m][o][ ][Set IU][ ][Data][ ][Cr] Data Key code: Refer to page 40. Acknowledgement [[o][ ][Set ID][ ][OK][Data][x] J * It's impossible to command the IR Code 0x08 and 0xC4 with RS-232C. 38