LG DVT654 Operation Guide - Page 17

Mini Glossary for Audio Stream &amp, Surround Mode, Sound Mode

Page 17 highlights

Installation and Setup Mini Glossary for Audio Stream & Surround Mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with " " mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Use this mode when playing movie or Dolby Digital 2 channel which carries the " " mark. This mode provides the effect of being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. (II) Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use with any stereo music recordings. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono. 3D SURROUND This unit can produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multichannel audio from a home theatre. This feature works with DVD discs encoded with Dolby Pro Logic and Dolby Digital audio tracks. BYPASS Software with multichannel surround audio signals is played according to the way it was recorded. Sound Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Each time you press SOUND button, the sound mode is changed in the following order; PRO LOGIC → PLII MOVIE → PLII MUSIC → PLII MATRIX → ROCK → POP → LIVE → DANCE → TECHNO → CLASSIC → SOFT → 3D SURROUND → BYPASS ... (This function available 2-channel mode only) Tips: ROCK: Reproduces the acoustics of rock music. POP: Reproduces the acoustics of pop music. LIVE: Reproduces the acoustics of a 300-seat live. DANCE: Reproduces the acoustics of dance music. TECHNO: Reproduces the acoustics of techno music. CLASSIC: Reproduces the acoustics of orchestral music. SOFT: Ideal for soft acoustic sounds. When DVD is inserted. You can change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. Each time you press AUDIO button, the sound mode of DVD is changed as the following order; → → → For your reference • The DVD/CD receiver memorizes the last mode settings for each source individually. • You can identify the encoding format of program software by looking at its packaging. - Dolby Digital discs are labeled with the logo. - Dolby Surround encoded programs are labeled with the logo. - DTS Digital Surround discs are marked with DTS. Note: Sound Mode is not applicable when headphone is used. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

17
Installation and Setup
Mini Glossary for Audio Stream &
Surround Mode
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in
exceptional clarity throughout a true 360 degree sound field.
The term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
program source. If you play DVDs with “
” mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
Use this mode when playing movie or Dolby Digital 2 channel
which carries the “
” mark. This mode provides the effect
of being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic
than before.
(
II
)
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The ultimate
“cure” for poor FM stereo reception may be simply to force the
audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio
playback from two conventional stereo speakers instead of the
five or more speakers normally required to listen to multi-
channel audio from a home theatre. This feature works with
DVD discs encoded with Dolby Pro Logic and Dolby Digital
audio tracks.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
Each time you press
SOUND
button, the sound mode is
changed in the following order;
PRO LOGIC
PL
II
MOVIE
PL
II
MUSIC
PL
II
MATRIX
ROCK
POP
LIVE
DANCE
TECHNO
CLASSIC
SOFT
3D SURROUND
BYPASS ...
(This function available 2-channel mode only)
Tips:
±
ROCK: Reproduces the acoustics of rock music.
±
POP: Reproduces the acoustics of pop music.
±
LIVE: Reproduces the acoustics of a 300-seat live.
±
DANCE: Reproduces the acoustics of dance music.
±
TECHNO: Reproduces the acoustics of techno
music.
±
CLASSIC: Reproduces the acoustics of orchestral
music.
±
SOFT: Ideal for soft acoustic sounds.
When DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the
AUDIO
button on the remote
during playback.
Although the DVD contents differ from disc to disc, the
following explains the basic operation when this feature is
used.
Each time you press
AUDIO
button, the sound mode of DVD is
changed as the following order;
For your reference
The DVD/CD receiver memorizes the last mode
settings for each source individually.
You can identify the encoding format of program
software by looking at its packaging.
-
Dolby Digital discs are labeled with the
logo.
-
Dolby Surround encoded programs are labeled with
the
logo.
-
DTS Digital Surround discs are marked with DTS.
Note:
±
Sound Mode is not applicable when headphone is used.