LG GE24LU20 Installation Instructions - Page 1
LG GE24LU20 Manual
View all LG GE24LU20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Hardware Installation NOTES • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with an open USB port before connecting the drive to your computer. • Power for all device should be turn off before attaching the cables. To AC wall outlet. USB converter cable Connecting to computer Connect the drive to the computer as shown in figure. Connect the USB converter cable to the External Super Multi DVD Rewriter. Connect the other end of the USB converter cable to your computer. Connect the AC adapter plug to the power connector at the rear of the drive. Attach the AC adapter to the AC wall outlet. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. NOTES • Please do not connect the AC adapter and USB 2.0 converter cable by any means other than specified above. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.