LG HBLG1200H Owners Manual - Page 10

SUGGESTED TOOL REQUIREMENTS SCREWDRIVER(+,-), RULLER, KNIFE, HAMMER, PENCIL, LEVEL PREPARATION OF CHASSIS 1, Remove the screws which fasten the cabinet at: both sides and at the back. 2. Slide the unit from the cabinet by' gripping the base pan handle and pulling forward while bracing the cabinet. 3. Remove EPS Material. 4, Cut the window sash seal to the proper length. Peel off the backing and attach the foam-pc @ to the underside of the window sash. 5, Remove the backing from the top upper guide Foam PE @ and attach it to the bosom of the upper guide Q, 6. A_ach the upper guide onto the top of the cabinet with 3 type A screws. 7. insert the frame guides @ into the bottom of the cabinet. 8. insert the Frame Curtain O) into the upper guide @ and frame guides @. 9, Fasten the curtains to the unit with 4 Type A screws. (Type A}_. i Shipping screws EPS Matedal CABINET INSTALLATION 1. Open the window. Mark a line on center of the window stool(or desired air conditioner location). Carefully place the, cabinet on the window stool and align the center mark on the bottom front with the _nter line marked in the window stool. 2, Pull the bottom window sash down behind the upper guide until it meets. NOTE: • Do not puli the window sash down so tightly that the movement of Frame Curtain is restricted. -10- (Type A) Upper Guid_indow Window Foam- Upper guide ;_gll Fig. 2