LG HBLG1803R Service Manual - Page 9
Suggested tool Requirements
View all LG HBLG1803R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Suggested tool Requirements SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL Preparation of Chassis 1. Remove the screws which fasten the cabinet at both sides and at the back. Keep these two screws which fasten the cabinet at both sides for later use. 2. Slide the unit out from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet. Shipping Screws CHDOEOAFLTROST Figure 2 3. Cut the window sash seal to the proper length. Peel off the backing and attach the Foam-Seal to the underside of the window sash. 4. Remove the backing from Foam-PE with 3 holes and attach it to the bottom of the Top retainer bar. 5. Attach the Top retainer bar onto the top of the cabinet with 3 screws (Type A). 6. Insert the Frame guides into the bottom of the cabinet. Figure 3 7. Insert the Frame Curtain into the Top retainer bar and Frame guides. Foam-Seal Figure 4 8. Fasten the curtains to the unit with 10 screws (Type A) at both sides. Top retainer bar Top retainer bar Foam-PE Screw (Type A) Frame guide Figure 5 Screw (Type A) Service Manual 9