LG LAN245HV Owner's Manual - Page 12

ENGLISH Healthy Dehumidification Operation Operating Instructions Healthy Dehumidification During Healthy Dehumidification Operation ❏ If you select the dehumidification mode on the OPERATION MODE SELECTION BUTTON, the product starts to run the dehumidification function. It automatically sets the room temperature and airflow volume to the best condition for dehumidification, based on the sensed current room temperature. In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control the room temperature either. ❏ During the healthy dehumidification function, the airflow volume is automatically set according to the optimization algorithm responding to the current room temperature status, so that the room condition is kept healthy and comfortable even in the very humid season. To run the healthy dehumidification mode follow steps 1, and 2 and 4 (See operation mode) Auto Operation (Cooling Only Model) Auto In this operation mode the actual setting temperature and the fan speed are automatically set by the electronic control logic based on the current room temperature. If you feel hot or cold press the temperature setting buttons respectively for more cooling or heating effect. NOTE : You cannot set the actual setting temperature and the indoor fan speed in this operation mode. But you can use the Chaos swing in this operation. If the system is not operating as desired, switch manually to another mode. To run the auto operation follow steps 1, and 2. (See operation mode) Auto Changeover Operation (Heat Pump Model) Auto Changeover Auto operation basically is heating or cooling function of the air conditioner. But during this operation the controller changes the operation mode automatically to keep the temperature within ±2°C with respect to the setting temperature. To run this operation follow steps 1, 2, 3, and 4. (See operation mode) Owner's Manual 11