LG LAS450H Owners Manual - English - Page 12
Connecting, Wireless subwoofer connection - reset
View all LG LAS450H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Connecting Connecting Wireless subwoofer connection LED indicator of wireless subwoofer 3. If the LED of the wireless subwoofer already blinks in yellow-green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. LED Color Status 2 Yellow-green The connection is trying. (Blink) Yellow-green The connection is completed. Red Off (No display) The wireless subwoofer is in standby mode or the connection is failed. The power cord of wireless subwoofer is disconnected. Setting up the wireless subwoofer for the first time 1. Connect the power cord of the wireless subwoofer to the outlet. 2. Turn on the main unit : The main unit and wireless subwoofer will be automatically connected. Manually pairing wireless subwoofer When your connection is not completed, you can see the red LED or the blinking of yellow-green LED on the wireless subwoofer and the subwoofer does not make sound. To solve the problem, follow the below steps. 1. Adjust volume level of the main unit to minimum. -- "VOL MIN" appears on the display window. 2. Press and hold (Mute) on the remote control for about 3 seconds. -- "WL RESET" appears on the display window briefly and Red LED on the main unit is blinking -- The LED of the wireless subwoofer lights up alternately in red and yellow-green. 4. Disconnect the power cord of the main unit and the wireless subwoofer. 5. Connect them again after the LED of the main unit and the wireless subwoofer is fully turned off. The main unit and the wireless subwoofer will be paired automatically when you turn on the main unit. -- When the connection is completed, you can see the yellow-green LED on the subwoofer. ,,Note yy It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds. yy The closer the main unit and the subwoofer, the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible (within 5 m) and avoid the cases below. -- There is a obstacle between the main unit and the subwoofer. -- There is a device using same frequency with this wireless connection such as a medical equipment, a microwave or a wireless LAN device.