LG LAS851M User Guide - English - Page 19
Software Update, How can I initialize speaker?, Speaker is not connected., There are times
View all LG LAS851M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Troubleshooting 19 Software Update When the MUSICflow device is connected to your home network, check whether the firmware version is the latest on all speakers and the Music Flow Player application. Your MUSICflow device might require a more recent firmware to be installed for optimal operation. [Settings à Version Info]: you can check if your speaker has the latest firmware. How can I initialize speaker? If you press down " (Add)" button until Beep sounds once, the network related settings are initialized. (For sound bar, "DISABLED" is displayed in the display window.) If you press down " (Add)" button until Beep sounds twice, factory initialization is performed. (For sound bar "RESET" is displayed in the display window.) There are times that speaker disappears from the application 1. If the speaker blinking lamp is not blinking, and stays as white: Even after the speaker power off and on, if the problem continues, in this case you have to reset the speaker (To reset, press and hold the "ADD" button for 8 seconds until you hear one beep. ) then you need to register again. Carry out speaker installation or additional procedures. 2. If the speaker blinking lamp blinks white network signal is unstable. Wait for a while, or move the speaker to another location closer to another speaker or router. 3. Press menu key or menu at the top right side of Home screen to end Music Flow Player app and run again. Speaker is not connected. 1. For a speaker that is already connected, make sure the phone is connected to the same router as the speaker. If not, connect to the same router, also check the following. 5 1-1. Set Power off / on, and check the connection. Troubleshooting 1-2. If it is not solved by 1-1, close the application and run again. 1-3. If it is not solved by 1-2, reset the Speaker and reconnect. To reset, press and hold the "ADD" button for 8 seconds until you hear one beep. 1-4. If it is not solved by 1-3, delete the App and reinstall, then try again. 2. If you change the location of the speaker that is in use, 2-1. If the changed location is too far from the home router, it may not be connected. Place and use it at a location that is close enough to router. 2-2. Connect the speaker with a LAN cable, and for additionally installed speakers, if they are not close enough to the speaker connected with a LAN cable, additionally install Bridge or another speaker in the middle location between the speaker connected with LAN cable and the speaker with sound being disconnected. LAS651M_BUSALLA_SIM_ENG_6766.indd 19 2015-04-30 1:51:04