LG LCG3091ST Owner's Manual - Page 11

CARE AND CLEANING OF THE COOKTOP BURNER CAPS AND HEADS BURNER CAPS Lift burner caps off when they are cool. Wash burner caps in hot, soapy water and rinse with clean water. You may scour with a plastic scouring pad to remove burned-on food particles. Burner cap is properly seated. Burner cap is NOT properly seated. To get rid of burned-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20-30 minutes. For more stubborn stains, use a toothbrush. NOTES: • Do not use steel wool or scouring powders to clean the burners. • Burners will not light if the cap is removed. Dual Extra Large Burner outer cap (on some models) To place the dual extra large burner outer cap properly, make sure the slit in the burner cap is positioned over the assemble guide in the burner head. slit assemble guide AFTER CLEANING Before placing the burner caps and burner heads back, shake out excess water and then dry them thoroughly. REPLACEMENT Replace burner heads and caps over the electrodes on the cooktop, in the correct locations according to their size. There are one small, two medium, one large and one extra large burner head and cap. BURNER HEADS Extra large burner (Center) head and cap (on some models) Cooktop Medium burner head and cap Small burner head and cap The burner heads are removable. Simply lift them off the cooktop for cleaning. The slits in the burner heads must be kept clean at all times for an even flame. Clogged or dirty burner ports or electrodes may cause improper operation of the cooktop. Any spill on or around an electrode must be carefully cleaned. Take care to not hit an electrode with anything hard or it could be damaged. You should clean the burner caps and heads routinely, especially after bad spillovers which could clog the openings. Lift burner heads off when they are cool. Lrage burner head and cap 11