LG LDA-511 Owners Manual - Page 10

Installation and Setup Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information. S-Video: Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S) Component Video : Connect the COMPONENT VIDEO OUT / (480p / 720p / 1080i) jacks on the DVD Player to the corresponding in jacks on the TV using an Y Pb Pr cable (C). • If your television is a high-definition or "digital ready" television, you may take advantage of displaying the highest video resolution possible. • If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read TV's owner's manual then set the resolution that your TV can accept. Resolution setting You can change the resolution for the COMPONENT VIDEO OUT / (480p / 720p / 1080i) video output by pressing RESOLUTION on the front panel. Available resolution settings are as shown below. OUTPUT Available i CONNECTION Resolution HDMI 1920 x 1080i i VIDEO OUT 1280 x 720p 720 x 480p 1440 x 480i COMPONENT 1920 x 1080i i VIDEO OUT 1280 x 720p 720 x 480p 720 x 480i VIDEO OUT 720 x 480i i S-VIDEO 720 x 480i i Video and Audio Connections to Your TV Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. Audio: Connect the left and right AUDIO OUT jacks of the DVD Player to the audio left and right IN jacks on the TV (A) using the audio cables. Do not connect the DVD Player's AUDIO OUT jack to the phone in jack (record deck) of your audio system. Video: Connect the VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable (V). Notes: • For 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 480p resolution. • 1080i, 720p and 480p do not work with the analog video connections (VIDEO OUT & S-VIDEO). 10