LG LDC22720ST Owner's Manual (English) - Page 18

REFRIGERATOR INSTALLATION Use an adjustable wrench to remove the handle mounting screws (3). Carefully loosen the plug buttons with your fingers (4). The buttons can be unscrewed with your fingers, rotating the pieces counter clockwise, and then the piece will be loose and fall. The buttons were installed without some pressure, for this reason the action can be done with your forefinger or thumb finger or with both. Install the plug buttons (4) on left side. Install the handle mounting screw (3) on the right side Hold the handle so the masking tape is at the bottom. Align keyhole slots (2) on the top and bottom of the back of the handle with the screws (3) mounted on the front of the door. Press the handle against the door front, making sure that the screws (3) go into the keyhole slots (2). Grasping the handle with both hands, press it firmly against the front of the door and slide the handle down (6). This may require some force. 4. Removing Freezer Handle NOTE: Before start, check handle type in your model. Handle Type 1 Remove the cap (1) and the 2 caps (2) using a slotted screwdriver. Loosen the 2 screws (3), take of f the handle (4), and install it on the right. Attach the caps you removed earlier [figures (1) and (2)]. Handle Type 2 For this handle type is not neccesary remove it. 5. Installing Freezer Door Install the base grille (1). Install the door (3) onto the bottom hinge pin. Install the middle hinge (4) on the opposite side with the screw (5) and the screws (9). 6. Installing Refrigerator Door Place the washer (6) on the middle hinge pin (7). Install the door (8) so that it fits onto the middle hinge pin (7). Install the top hinge (10) with screws. Reinstall top hinge cover (11). 18