LG LDE4413ST Owners Manual - English Spanish - Page 24
Using the Cooktop, Cooking Areas, Hot Surface Indicator, Using the Cooktop Elements
![]() |
View all LG LDE4413ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 OPERATION Using the Cooktop Cooking Areas The cooking areas on your range are identified by permanent circles on the glass cooktop surface. For the most efficient cooking, fit the pan size to the element size. Pans should not extend more than 1/2 to 1-inch beyond the cooking area. When a control is turned on, a glow can be seen through the glass cooktop surface. The element cycles on and off to maintain the preset heat setting, even on Hi. For Model : LDE4415 For Model : LDE4413 SINGLE WARM ZONE SINGLE SINGLE WARM ZONE SINGLE DUAL TRIPLE DUAL DUAL For Model : LDE4411 SINGLE WARM ZONE SINGLE DUAL SINGLE Using the Cooktop Elements CAUTION •• Only use cookware and dishes that are safe for oven and cooktop use. •• Always use oven mitts when removing food from the cooktop and oven. •• Do not place sealed containers on the cooktop. •• Do not use plastic wrap to cover food while on the cooktop. Plastic may melt onto the surface and be very difficult to remove. •• Never leave food on the cooktop unattended. Spillovers can cause smoke. Greasy spillovers may catch on fire. •• The surface element may appear to have cooled after it has been turned off. The element may still be hot and touching the element before it has cooled sufficiently can cause burns. Turning on a Single element 1 Push the Single element knob in. 2 Turn the knob in either direction to the desired setting. The control knob clicks when it is positioned at both Off and Hi. NOTE It is normal to see a very faint red ring around the outer edge of a dual or triple element when using it as a single element at a high heat setting. This is only a reflection from the bright glow of the center element and is not a malfunction. Hot Surface Indicator The hot surface indicator light glows as long as any surface cooking area is too hot to touch. It remains on after the element is turned off and until the surface has cooled to approximately 150 °F. CAUTION It is normal for the surface elements to cycle on and off during cooking, even on higher settings. This will happen more frequently if cooking on a lower temperature setting. Single Off On NOTE •• Hi is the highest temperature available. •• Lo is the lowest temperature available.
![](/manual_guide/products/lg-lde4413st-owners-manual-english-spanish-0a43008/24.png)