LG LDF9810ST Owner's Manual (English) - Page 11

F UNCTIONS OF CONTROL PANEL INDICATOR STEAM OPTION INDICATOR Indicates that the STEAM option has been selected. The symbol will blink while steam is being injected into the dishwasher. RINSE INDICATOR It shows configuration of rinse option. The ( ) symbol indicates that sanitary rinse has been selected. The symbol blinks during the cycle if the sanitary temperature has been achieved. Once the cycle has ended, the symbol will be steady if the sanitary temperature has been achieved. (See NOTE below.) The ( ) symbol indicates that an extra rinse has been added to the selected cycle. SPRAY INDICATOR Indicates the selected spray intensity: Strong ( ), Medium ( ) or Soft ( ). HALF LOAD INDICATOR Each press of the HALF LOAD key cycles between upper rack only and lower rack only. When DUAL INTENSITYTM is selected, both lights will be and one will be blinking. The spray intensity for the blinking rack can be adjusted independently. CHILD LOCK This symbol will be visible when Child Lock is activated. RINSE AID The symbol will be activated when the rinse aid needs to be refilled TIME REMAINING Indicates normal run time for the cycle selected. During the cycle, the estimated time remaining for the selected cycle will be displayed CANCEL CHILD LOCK CANCEL & CHILD LOCK To cancel a running cycle, open the door, then press and hold the STEAM DELICATE and NORMAL buttons together for 3 seconds. The drain pump will be activated and the cycle will be canceled. To lock/unlock the buttons, press SPRAY and RINSE simultaneously for 3 seconds. When CHILD LOCK is set, the CHILD LOCK indicator will appear and all buttons are disabled. NOTE This high temperature rinse sanitizes dishware and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. 11