LG LDP6809SS Owners Manual - Page 29

28 OPERATION Control Panel 1 2 1 Power ••Press the Power button to turn power on and off. ••After the cycle is complete, the power automatically turns off for purposes of safety and economy. ••If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety. ••When power is connected again, it will turn on automatically and resume the cycle. 2 Display • • : Digital Display - The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time. NOTE ••The estimated time shown on the display does not include delay times for heating water, etc. ••If Delay Start is selected, the display shows the delay time in hours. ••Cycle time may vary depending on the soil level of your load. •• : Control Lock - The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door. - While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three seconds to activate or deactivate Control Lock. ••To start a new cycle, deactivate Control Lock. 4 3 •• : Rinse Aid Icon - This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0. ••Refer to the Rinse Aid Dispenser Adjustment section. •• :Machine Clean & Sanitized Icon a Machine Clean - This cycle is for cleaning the inside of the dishwasher. Use the cycle without dishes in the machine. It eliminates residual soils, odor, white spots, and other dirt. Add citric acid or another cleaning agent for more effective results. - Press and hold Heavy for three seconds to activate. NOTE - This icon flashes during cycle setup every 30 cycles. To activate or deactivate the icon, press the Delicate button for three seconds. b Sanitized (on some models) - If the Steam option is added to a cycle, this icon indicator stays lit at the end of the cycle if the dishes were properly sanitized. •• : Wi-Fi - When the appliance is connected to the internet through a home Wi-Fi network, this icon illuminates. - Press and hold Delay Start for approximately three seconds to connect to the network.