LG LDS4821BB Service Manual - Page 21
Error Message, Possible Cause, Remedy, For Error Occurrence - thermistor
![]() |
UPC - 048231009683
View all LG LDS4821BB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ERROR MESSAGE EXCESS ERROR displayed Condition Excessive water is supplied than normal water level.(Automatically drain Pump operated.) POSSIBLE CAUSE FOR ERROR OCCURRENCE REMEDY The Inlet Valve is troubled. The Controller is troubled. Replace the Inlet Valve. Repair or replace the Controller. THERMAL ERROR displayed Condition The resistance of thermistor not normally out put. The Inlet Water Temperature is very high. (over 194 ) Wiring connection is OK? The Thermistor is OK? Check the temperature. (Test Mode) If the temperature is displayed, adjust the Inlet Water Temperature to 120 . If the temperature is not displayed, check the wiring connection. check the electric resistance of Thermistor. (11~14k at 77 ) Replace the PCB. MOTOR ERROR displayed Condition The Motor is working abnormally. Wiring connection is OK? The Impeller of Washing Pump is locked. The rotor of Washing Motor is locked. The Blade is locked. Check the wiring connection. Replace the cause of restriction. Replace the Washing Motor. Replace the PCB. - 22 -
![](/manual_guide/products/lg-lds4821bb-service-manual-b0f2114/21.png)