LG LDS5811BB User Guide - Page 101

Retrofit instructions continued

Get LG LDS5811BB - Semi-Integrated With Status Display Dishwasher BLAC PDF manuals and user guides
UPC - 048231008471
View all LG LDS5811BB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

Appendix. C ¡ Retrofit instructions continued 6) Using the new vent as a template, drill a new hole* for mounting the vent. Attach the vent using the black screw from the old vent. Align the bottom of the vent with the bottom of the door panel when assembling vent. * NOTE: Be careful not to damage the door liner w hen dr illing the hole. CAUTION Mark the location to drill the hole. Make sure the bottom of the vent will align with the bottom of the front door panel. Drill the pilot hole. Be careful not to damage the door liner when drilling the hole. 7) Attach one end of the rubber drain hose to the fitting on the bottom of the blower housing and secure with the clamp. Route the drain hose down the right side of the door behind the screw and foam so it can drain into the tub. Clamp (K141) Ro u ti n g Hos e(K140) Cl a m p 8) Secure the drain hose in position with the retaining wire at the dispenser or a piece of tape as needed. 9) Reassemble control panel and front door panel. Test for proper operation. - 101 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
- 101 -
- 101 -
Appendix. C
ยก
Retrofit instructions continued
7) Attach one end of the rubber drain hose to the fitting on the bottom of the blower
housing and secure with the clamp.
Route the drain hose down the right side
of the door behind the screw and foam so it can drain into the tub.
8) Secure the drain hose in position with the retaining wire at the dispenser or a
piece of tape as needed.
Clamp
(K141)
Hose(K140)
9) Reassemble control panel and front
door panel.
Test for proper operation.
Clamp
Routing
6) Using the new vent as a template, drill a new hole* for mounting the vent. Attach
the vent using the black screw from the old vent.
Align the bottom of the vent
with the bottom of the door panel when assembling vent.
* NOTE:
Be careful not to damage the door liner when dr
illing the hole.
Mark the location to drill the
hole. Make sure the bottom of
the vent will align with the
bottom of the front door
panel.
Drill the pilot hole. Be careful
not to damage the door liner
when drilling the hole.
CAUTION