LG LDS5811ST Owner's Manual (English) - Page 18

Operating Sequence - started then stopped no power

Page 18 highlights

O PERATING SEQUENCE 1. Press the power button. Press the power button to see the default setting. 2. Check rinse-aid level and open the door. The indicator lights will illuminate if refilling is necessary. 3. Load the dishes after first removing any scraps of food. Remove any scraps of food in advance. Pull the lower rack out and load the dishes and cutlery in and push it all the way back. Pull the upper rack out and load the cups, glasses, etc. 4. Ensure that the spray arms can rotate freely. 5. Measure detergent. Add the required amount of detergent into the dispenser. Close the detergent dispenser lid. 6. Setting the program. Select desired program and options. Before starting, the display window will show the estimated running time of the selected program. If the number of dishes only fill one rack, you can use the Half Load option. For example, if you load dishes only on the upper rack, you adjust the half load button to the upper rack. Remember to load all dishes into the selected rack. The estimated remaining time will be displayed. If the door is opened during operation, the dishwasher stops. Once the door is closed, the program will restart from the point where it's stopped. 7. Close the door. The dishwasher will start automatically. 8. At the end of the Program. End is displayed on the digital display for a few seconds and a tone will sound signaling the program completion. The dishwasher automatically switches off for safety and energy savings. CAUTION Empty the lower rack first and then the upper one, this will avoid water dripping from the upper rack onto the dishes in the lower one. WARNING In general, it is not advisable to open the door while the dishwasher is running. If the door is opened, a safety device stops the machine. Care should be taken when opening the door immediately following the cycle, as steam may escape. Auto-Off When the power is turned on, if you don't select a program or if you don't close the door after selecting a program, your dishwasher will automatically turn off in 10 minutes. OPERATING SEQUENCE 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

18
WARNING
In general, it is not advisable to open the door
while the dishwasher is running. If the door is
opened, a safety device stops the machine.
Care should be taken when opening the door
immediately following the cycle, as steam may
escape.
OPERATINGSEQUENCE
O
PERATING SEQUENCE
1. Press the power button.
Press the power button to see the default
setting.
2. Check rinse-aid level and
open the door.
The indicator lights will illuminate if refilling
is necessary.
3. Load the dishes after first
removing any scraps of food.
Remove any scraps of food in advance.
Pull the lower rack out and load the dishes
and cutlery in and push it all the way back.
Pull the upper rack out and load the cups,
glasses, etc.
4. Ensure that the spray arms
can rotate freely.
5. Measure detergent.
Add the required amount of detergent into
the dispenser. Close the detergent
dispenser lid.
6. Setting the program.
Select desired program and options. Before
starting, the display window will show the
estimated running time of the selected
program. If the number of dishes only fill
one rack, you can use the Half Load option.
For example, if you load dishes only on the
upper rack, you adjust the half load button
to the upper rack.
Remember to load all dishes into the
selected rack.
The estimated remaining time will be
displayed. If the door is opened during
operation, the dishwasher stops. Once the
door is closed, the program will restart from
the point where it's stopped.
7.
Close the door. The dishwasher
will start automatically.
8. At the end of the Program.
End is displayed on the digital display for a
few seconds and a tone will sound
signaling the program completion. The
dishwasher automatically switches off for
safety and energy savings.
CAUTION
Empty the lower rack first and then the upper
one, this will avoid water dripping from the
upper rack onto the dishes in the lower one.
Auto-Off
When the power is turned on, if you don’t
select a program or if you don’t close the door
after selecting a program, your dishwasher will
automatically turn off in 10 minutes.