LG LFC25760SW User Guide - Page 16

Ensuring, Proper, Air Circulation, Setting, Controls - problem

Get LG LFC25760SW PDF manuals and user guides View all LG LFC25760SW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, air enters at top of the freezer and circulates down. From the bottom of the freezer, air is forced up to the top of the refrigerator. Air enters refrigerator through the top vent, then circulates and exists at the bottom, where it returns to the freezer. MULTI-FLOW • Multi-Flow means powerful and effective cooling operation. This is especially noticeable when new food is placed in the refrigerator compartment. • If water or foreign substances enter the cool air vent while cleaning, efficiency will be lowered. In addition, if gasket is damaged, efficiency may be lowered because of escaping cool air. SETTING THE CONTROLS • Your refrigerator has two controls that let you regulate the temperature in the freezer and refrigerator compartments. • Initially set the REFRIGERATOR CONTROL at 37°F (3°C) and the FREEZER CONTROL at 0°F (-18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired. Refrigerator control: 33°F to 46°F (0°C to 8°C) The lower the number setting, the colder the refrigerator compartment will become. ICE PLUS 37 _FIS RECOMMENDED • Freezer control: -6°F to 8°F (-21°0 to -13°0) When the setting is at a lower number, the freezer compartment becomes colder. But the refrigerator compartment becomes warmer because less cold air flows into the refrigerator. • ICE PLUS: Press the ICE PLUS key and the LED will turn on. This function will remain activated for 24 hours and intensify the cooling speed of freezer and increase the amount of ice. ICE PLUS 0 °F IS RECOMMENDED NOTE: If you want to change °F to °C, press and hold COLDER key of freezer and COLDER key of refrigerator over 5 seconds at the same time. and if you want to change °C to °F, hold them for 5 seconds again. Do not block any of cool air vents with food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur. IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly. (See the Food Storage Guide section for details.) 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
ENSURING
PROPER
AIR CIRCULATION
In order to ensure proper temperatures,
air must flow
•
between
the refrigerator
and freezer
sections. As shown
in the illustration
below, air enters at top of the freezer and
circulates
down. From the bottom of the freezer, air is
forced up to the top of the refrigerator. Air enters
•
refrigerator
through the top vent, then circulates
and
exists at the bottom, where
it returns to the freezer.
MULTI-FLOW
• Multi-Flow
means powerful and effective cooling
operation.
This is especially
noticeable
when new food
is placed in the refrigerator
compartment.
• If water or foreign substances
enter the cool air vent
while cleaning,
efficiency will be lowered.
In addition,
if
gasket is damaged,
efficiency
may be lowered because
of escaping cool air.
SETTING
THE
CONTROLS
Your refrigerator
has two controls that let you regulate
the temperature
in the freezer
and refrigerator
compartments.
Initially set the REFRIGERATOR
CONTROL
at 37°F
(3°C) and the FREEZER
CONTROL
at 0°F (-18°C).
Leave it at this setting for 24 hours (one day) to
stabilize.
Then adjust the compartment
temperature
as desired.
Refrigerator
control:
33°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment
will become.
37
_F
IS RECOMMENDED
ICE PLUS
•
Freezer control:
-6°F
to
8°F
(-21°0
to -13°0)
When the setting is at a lower number, the freezer
compartment
becomes colder. But the refrigerator
compartment
becomes warmer
because less cold air
flows into the refrigerator.
• ICE
PLUS:
Press the ICE PLUS key and the LED will turn on. This
function will remain activated
for 24 hours and intensify
the cooling speed of freezer and increase
the amount of
ice.
ICE PLUS
0
°F
IS
RECOMMENDED
NOTE:
If you
want
to change °F to °C, press and hold
COLDER
key of freezer
and COLDER
key of refrigerator
over 5 seconds at the same time. and if you want to
change °C to °F, hold them for 5 seconds again.
Do not block any of cool air vents with
food packages.
If the vents are blocked, airflow will be interrupted
and
temperature
and moisture
problems
may occur.
IMPORTANT:
Because air circulates
between
both
sections, any odors formed
in one section will transfer to
the other. You must thoroughly
clean both sections to
eliminate
odors. To prevent odor transfer
and drying
out of
food, wrap or cover foods tightly. (See the Food Storage
Guide section for details.)
16