LG LFD750 Owner's Manual - Page 9

Auxiliary Function, Headphone Jack, To Adjust ECHO Volume, Using Microphone, iPod connection - remote control

Page 9 highlights

Auxiliary Function Connect an auxiliary device such as a TV or VCR via the rear mounted AUX connector and press AUX [Refer to the example image(1) shown below]. When you connect each end of the bundled portable in cable with both the AUX connector and the headphone jack of a portable device (like MP3 player, cassette tape player, CD player, etc.), you can hear the sound of the device through the speakers [Refer to the example image(2) shown below]. Example (1) To AUDIO in Auxiliary Device To AUDIO out Example (2) Using Microphone You can sing to a music source by connecting a microphone to the unit. 1. Connect your microphone to the MIC1/ MIC 2 Jacks. " " will be shown in the display window. 2. Play a music you want. 3. Sing along with the accompaniment. Adjust the microphone volume by pressing MIC VOL. button.(MIN,1 - 14, MAX steps) Note: • When not using the microphone, set the MIC VOL. to minimum or turn off the MICs and remove the microphone from the MIC Jacks. • If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using MIC VOL.. • If sound through the microphone is extremely loud, it may be distorted. In this case, decrese MIC volume. iPod connection Connect the iPod connector on the rear of the unit to the dock connector of iPod using an iPod cable (I). MENU Installation and Setup Portable in cable iPod I Portable Device Note: Turn the unit off and then connect an auxiliary device before you connect an auxiliary device. Because it may be made a noise. Headphone Jack Connect a stereo headphone plug ( 3.5mm) into the headphone jack. The speakers are automatically disconnected when you plug in the headphones (not supplied). To Adjust ECHO Volume You can give an echo effect to the sound from the microphones. Press ECHO VOL. ( / ) on the Remote Control to increase the echo volume or decrease it. (MIN,1 - 14, MAX steps) Note: Depending on the type of iPod, you may need to insert one of the dock adapters into the dock slot before you station your iPod. Adjust the volume to a moderate level before you connect your iPod and this unit. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

9
Installation and Setup
Auxiliary Function
Connect an auxiliary device such as a TV or VCR via
the rear mounted AUX connector and press
AUX
[Refer
to the example image(1) shown below].
When you connect each end of the bundled portable in
cable with both the AUX connector and the headphone
jack of a portable device (like MP3 player, cassette tape
player, CD player, etc.), you can hear the sound of the
device through the speakers [Refer to the example
image(2) shown below].
Note:
Turn the unit off and then connect an auxiliary device
before you connect an auxiliary device.
Because it may be made a noise.
Headphone Jack
Connect a stereo headphone plug (
3.5mm) into the
headphone jack.
The speakers are automatically disconnected when you
plug in the headphones (not supplied).
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Press
ECHO VOL.
(
) on the Remote Control to
increase the echo volume or decrease it.
(MIN,1 - 14, MAX steps)
Using Microphone
You can sing to a music source by connecting a
microphone to the unit.
1. Connect your microphone to the MIC1/ MIC 2
Jacks.
” will be shown in the display window.
2. Play a music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by pressing
MIC
VOL.
button.(MIN,1 - 14, MAX steps)
Note:
When not using the microphone, set the
MIC VOL.
to
minimum or turn off the MICs and remove the
microphone from the MIC Jacks.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using
MIC VOL.
.
If sound through the microphone is extremely loud, it
may be distorted. In this case, decrese MIC volume.
iPod connection
Connect the iPod connector on the rear of the unit to
the dock connector of iPod using an iPod cable
(I)
.
Note:
z
Depending on the type of iPod, you may need to
insert one of the dock adapters into the dock slot
before you station your iPod.
z
Adjust the volume to a moderate level before you
connect your iPod and this unit.
Auxiliary Device
To AUDIO out
Portable in cable
To AUDIO in
Example (1)
Example (2)
Portable Device
MENU
iPod
I