LG LFX28968SW Owners Manual - Page 36

Light bulb replacement

Page 36 highlights

ENGLISH 36 MAINTENANCE Light bulb replacement Warning Electrical Shock Hazard Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Note The refrigerator compartment has LED interior lighting and service should only be performed by a qualified technician. 4 Rotate the bulb counterclockwise to remove. 5 Replace with a new 60-watt appliance bulb. 6 Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place. 7 Tighten the screw using a Phillips screwdriver. Change Freezer Compartment Light Bulb 1 Unplug refrigerator power cord form outlet. 2 Remove the screw using a Phillips screwdriver. 3 Grasp the light cover, pull the cover downward. Caution yy Make sure the bulb is cool to the touch.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59

36
MAINTENANCE
ENGLISH
Light bulb replacement
Change Freezer Compartment Light
Bulb
1
Unplug refrigerator power cord form outlet.
2
Remove the screw using a Phillips
screwdriver.
3
Grasp the light cover, pull the cover
downward.
4
Rotate the bulb counterclockwise to remove.
5
Replace with a new 60-watt appliance bulb.
6
Insert tabs on back of cover into slots in
freezer ceiling. Push cover up to snap front
into place.
7
Tighten the screw using a Phillips
screwdriver.
CAUTION
Make sure the bulb is cool to the
y
touch.
NOTE
The refrigerator compartment has LED
interior lighting and service should only be
performed by a qualified technician.
WARNING
Electrical Shock Hazard
Before replacing a burned-out light bulb,
either unplug the refrigerator or turn off
power at the circuit breaker or fuse box.