LG LFX31935ST Owner's Manual - Page 28

Control Panel Features continued - air filter

Page 28 highlights

28 HOW TO USE ENGLISH Control Panel Features (continued) Fresh Air Filter [ ] (On some models) The Fresh Air Filter helps remove odors from the refrigerator. The Fresh Air Filter has two settings, Auto and Power(PWR). In Auto mode, the Fresh Air Filter will cycle on and off in increments of ten minutes on and one hundred ten minutes off. If set to the Power(PWR) mode, the Fresh Air Filter will stay on continuously for four hours, cycling on and off in increments of ten minutes on and five minutes off. After four hours, the Fresh Air Filter will switch back to Auto mode. y The Press the Air Filter button once for Power(PWR) mode. y Press the Air Filter button again to switch back to Auto mode. Change Filter [ ] (On some models) When the Change Filter icon turns on, the air filter needs to be replaced. After replacing the air filter, press and hold the Fresh Air Filter button for three seconds to turn the icon light off. It is recommended to change the air filter approximately every 6 months. Ice Plus This function increases both ice making and freezing capabilities. y When you touch the Ice Plus button, the graphic will illuminate in the display and will continue for 24 hours. The function will automatically shut off after 24 hours. y You can stop this function manually by touching the button one more time. Energy Saving The Energy Saving function disables the mullion heater located on the refrigerator door in order to conserve electricity. Press and hold the Energy Saving button for three seconds to activate or deactivate this function. NOTE Discontinue using the Energy Saving function if excessive moisture begins to collect on the door mullion. Light When you press the Light button, the dispenser light will turn on and the indicator will appear on the LED display. Change Water Filter When the water filter indicator turns on, you have to change the water filter. After changing the water filter, press and hold the Change Filter button for three seconds to turn the indicator light off. You need to change the water filter approximately every six months. Door Alarm y When power is connected to the refrigerator, the door alarm is initially set to ON. When you press the Door Alarm button, the display will change to OFF and the Door Alarm function will deactivate. y When either the refrigerator or the freezer door is left open for more than 60 seconds, the alarm tone will sound to let you know that the door is open. y When you close the door, the door alarm will stop. Control Lock The Control Lock function disables every other button on the display. y When power is initially connected to the refrigerator, the Lock function is off. y If you want to activate the Lock function to lock other buttons, press and hold the Lock button for three seconds or more. The Lock icon will display and the Lock function is now enabled. y To disable the Lock function, press and hold the Lock button for approximately three seconds. Power Saving Mode y When the refrigerator is in the Power Saving Mode, the display will remain off until a door is opened or a button is pressed. Once on, the display will remain on for 20 seconds.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

28
HOW TO USE
ENGLISH
Change Filter
Change Filter
When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the
air filter, press and hold the Fresh Air Filter
button for three seconds to turn the icon light
off. It is recommended to change the air filter
approximately every 6 months.
Control Panel Features (continued)
Ice Plus
Ice Plus
This function increases both ice making and
freezing capabilities.
When you touch the
Ice Plus
button, the
graphic will illuminate in the display and
will continue for 24 hours. The function will
automatically shut off after 24 hours.
You can stop this function manually by
touching the button one more time.
Energy Saving
Energy Saving
The Energy Saving function disables the
mullion heater located on the refrigerator door
in order to conserve electricity. Press and hold
the Energy Saving button for three seconds to
activate or deactivate this function.
Light
Light
When you press the Light button, the
dispenser light will turn on and the indicator
will appear on the LED display.
Change Water Filter
Change Water Filter
When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hold the Change
Filter button for three seconds to turn the
indicator light off. You need to change the
water filter approximately every six months.
NOTE
Discontinue using the Energy Saving
function if excessive moisture begins to
collect on the door mullion.
Door Alarm
Door Alarm
When power is connected to the
refrigerator, the door alarm is initially set to
ON. When you press the
Door Alarm
button,
the display will change to OFF and the
Door
Alarm
function will deactivate.
When either the refrigerator or the freezer
door is left open for more than 60 seconds,
the alarm tone will sound to let you know
that the door is open.
When you close the door, the door alarm
will stop.
Control Lock
Control Lock
The Control Lock function disables every other
The Control Lock function disables every other
button on the display.
button on the display.
When power is initially connected to the
refrigerator, the
Lock
function is off.
If you want to activate the
Lock
function to
lock other buttons, press and hold the
Lock
button for three seconds or more. The
Lock
icon will display and the
Lock
function is
now enabled.
To disable the
Lock
function, press and hold
the
Lock
button for approximately three
seconds.
Power Saving Mode
Power Saving Mode
When the refrigerator is in the
Power Saving
Mode
, the display will remain off until a door
is opened or a button is pressed. Once on,
the display will remain on for 20 seconds.
[
]
(On some
models)
Fresh Air Filter
Fresh Air Filter
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
will switch back to Auto mode.
The Press the Air Filter button once for
Power(PWR) mode.
Press the Air Filter button again to switch
back to Auto mode.
[
]
(On some
models)