LG LFXS24623S Owners Manual - Page 19
Adjusting The Temperatures And, Display, Temperature Display, Power Saving Mode In Some Models,
View all LG LFXS24623S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
USING YOUR REFRIGERATOR ADJUSTING THE TEMPERATURES AND DISPLAY Adjust Freezer Temperature To adjust the temperature in the freezer compartment, press the FREEZER button to cycle through the the range of available settings. Adjust Refrigerator Temperature To adjust the temperature in the refrigerator compartment, press the REFRIGERATOR button to cycle through the range of available settings. POWER SAVING MODE (in some models) ţ The display will remain off until the next time the door is opened. ţ The display will also turn on when any button is pressed, and it will remain on for 20 seconds after the last door opening or button selection. ţ To deactivate the Power-Saving Mode, press the FREEZER and ICE PLUS/ENERGY SAVING or ICE PLUS buttons simultaneously and hold them for 5 seconds until the tone sounds. NOTE: Power Saving Mode function is set on the product. Power Saving Mode is allways active in Models without energy Saving Mode. or NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature and not the actual temperature within the refrigerator. Initially set the REFRIGERATOR CONTROL at 37 °F (3°C) and the FREEZER CONTROL at 0°F (-18°C). Leave them at these setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as illustrated above. CAUTION WHEN CLOSING THE DOOR **TEMPERATURE DISPLAY To change the temperature display from Fahrenheit to Celsius: ţ Simultaneously press and hold the FREEZER and REFRIGERATOR buttons for more than 5 seconds. ţ Do the same to convert back to Fahrenheit. CAUTION To reduce the risk of door scratches, please make sure that the refrigerator door mullion is always folded in. If dew gathers on the refrigerator door mullion at any point, deactivate the Energy Saving mode until the issue resolves itself. . 18