LG LG500 User Guide - Page 60

LG500 ENG Rogers_1026 2005.11.7 10:26 AM ˘ ` 60 Settings Select Line (Menu 9.4.7) This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending short messages. Calls on both lines can be answered irrespective of the selected line. n Note You will not be able to make calls if you select Line 2 and have not sbscribed to this network service. Send DTMF Tones (Menu 9.4.8) You can send the DTMF (dual tone multi-frequency) tones of the number on the display during a call. This option is helpful for entering a password or account number when you call an automated system, like a banking service. Security Menu 9.5 Various codes and passwords are used to protect the features of your phone. They are described in the following sections. 60 Request PIN Code (Menu 9.5.1) When the PIN code request feature is enabled, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval. n Note Before disabling the PIN code request feature, you must enter your PIN The following options are available: ] Enable: You must enter the PIN each time the phone is switched on. ] Disable: The phone connects directly to the network when you switch it on. Phone Lock (Menu 9.5.2) You can use security code to avoid unauthorized use of the phone. Whenever you power on the phone, the phone will request the security code if you set phone lock to When Power On. If you want to lock your phone after power on, set Phone Lock to Immediately.