LG LHB326 Owner's Manual - Page 20
Antenna connection
View all LG LHB326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting 20 Connecting Resolution Setting Antenna connection The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME (n). Connect the supplied antenna for listening to the radio. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then 2 press D to move to the second level. 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows: 1. Press B to open the disc tray. 2 Press Z (STOP) for more than 5 seconds. yy Since several factors affect the resolution of video output, see "Video Output Resolution" on page 58. yy When you set the HDMI Resolution, over 720p is not outputted to Composit Video. Rear of the unit ,,Note yy To prevent noise pickup. keep the AM Loop antenna away from the unit and other components. yy After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna. HB926_ENG.indd 20 11. 03. 04 �� 5:14