LG LMC25780SW Owner's Manual - Page 16

LIGHT BULB REPLACEMENT wWARNING Electrical Shock Hazard Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. NOTE: Moving the control to the OFF position does not remove power to the light circuit. NOTE: • Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. • The light bulbs will turn off if door is left open for seven continuous minutes. Shutting door for one second will light bulbs to come back on. • There is a safety thermal protector in the "fresh food" compartments interior lights to prevent over heating if the door is left open too long. If the lights go off because the thermal protector is activated, close the doors and allow 10 minutes for the thermal protector to reset. To change Refrigerator Light Bulbs 1. Unplug Refrigerator, or disconnect power at the circuit breaker. 2. If necessary, remove top shelf or shelves. 3. Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove rear tabs. 4. Make sure the bulbs are cool to the touch. Turn bulbs counterclockwise to remove. Insert new bulb(s). 5. Replace with a new 60-watt appliance bulb. 6. Assemble in reverse order by snapping the Lamp Cover in, engaging the rear tabs followed by the front tabs. To change freezer light 1. Unplug refrigerator power cord form outlet. 2. Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove the rear tabs. 3. Make sure the bulb is cool to the touch. Turn the bulb counterclockwise to remove. 4. Replace with a new 60-watt appliance bulb. 5. Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place. wCAUTION • DO NOT place fingers inside of cover. Lamp may be hot. 16