LG LMWC23626S Owners Manual - Page 21
Turning on the Power
View all LG LMWC23626S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENGLISH it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. NOTE • A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten. INSTALLATION 21 CAUTION • Connect to a rated power outlet. • Have a certified electrician check the wall outlet and wiring for proper grounding. • Do not damage or cut off the ground terminal of the power plug. Position the Refrigerator • Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. 2 Open both doors and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount. Door Alignment (Standard Door Model) Both the left and right refrigerator doors have an adjustable nut, located on the bottom hinge, to raise and lower them to align properly. If the space between the doors is uneven even after the door bins are filled, follow the instructions below to align the doors evenly: Use the wrench (included with the owner's manual) to turn the nut in the door hinge to adjust the height. Turn the nut to the right to raise the door or to the left to lower it. Turning on the Power • After installing, plug the refrigerator's power cord into a 3-prong grounded outlet and push the refrigerator into the final position.