LG LMXS30746S Owners Manual - Page 19
Assembling the CustomChill™ Drawer, Removing the Freezer Drawer
View all LG LMXS30746S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH INSTALLATION 19 Assembling the CustomChill™ Drawer 1 Grasp the door on each side and lower it into place on the rail system. 2 Reconnect the wire harness to the connection at the end of the right rail by aligning the two ends and pushing them together until you hear a click. The tabs should snap back into place. Tug gently to make sure the connection is secure. Removing the Freezer Drawer CAUTION y Use two or more people to remove and install the freezer drawer. Failure to do so can result in back or other injury. y Do not hold the handle when removing or replacing the drawer. The handle may come off, causing personal injury. y Be careful of sharp hinges on both sides of the drawer. y When you lay the drawer down, be careful not to damage the floor. y Do not sit or stand on the freezer drawer. y To prevent accidents, keep children and pets away from the drawer. Do not leave the drawer open. 1 Pull the freezer drawer open to full extension. 2 Remove the top pullout drawer by first pulling the drawer open to full extension. NOTE If you do not reconnect the wire harness securely, the CustomChill™ drawer will not work properly. 3 Pull the drawer open to full extension. Lower the basket onto the rail system. On the left rail, use a flat blade screwdriver to push in on the tab to release the drawer from the rail, as shown below. Once the left side is loose, push the tab on the right side with your finger to release the drawer. Lift the front of the drawer up, then pull it straight out.