LG LP120CED Owners Manual - Page 9
Electrical Safety - warranty
View all LG LP120CED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Electrical Safety Electrical Safety Electrical Data 115V~ 230V~ 265V~ Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician. NOTICE The shape may be different according to its model. Use Wall Receptacle Power Supply Standard 208/230V, 3-wire grounding receptacle rated 15A Use 15 AMP. time delay fuse or 15 AMP. Circuit breaker. Standard 208/230V, 3-wire grounding receptacle rated 20A Use 20 AMP. time delay fuse or 20 AMP. Circuit breaker. Never push the test button during operation Otherwise this plug can damaged. This device contains chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. Do not remove, modify, or immerse this plug. If this device trips, the cause should be corrected before further use. Standard 208/230V, 3-wire grounding receptacle rated 30A Use 30 AMP. time delay fuse or 30 AMP. Circuit breaker. NOTICE DO NOT USE AN EXTENSION CORD on 230, 208, and 230/208 Volt units. All wiring should be made in accordance with local electrical codes and regulations. Aluminum house wiring may pose special problems. Consult a qualified electrician. The conductors inside this cord are surrounded by shields, which monitor leakage current. These shields are not grounded. Periodically examine the cord for any damage. Do not use this product in the event the shields become exposed. Avoid shock hazard! This unit cannot be serviced. Opening the tamperresistant, sealed portion of the unit voids all warranties and performance claims. This unit is not intended to be an ON/OFF switch. Owner's Manual 9