LG LRE3012ST Owner's Manual - Page 8

SURFACE CONTROLS COOKING PF MESSAGE The PF message will appear whenever there has been a power interruption to the appliance. To clear the PF message press ON/OFF control pad to reset and be sure to reset the clock with the correct time of day. H S ( Hot Surface) MESSAGE LIGHT WILL: • Come on when the unit is hot to touch after it is turned off. • Come on during Self Cleaning Cycle. • Stay on even after the unit is turned off. • Glow until the unit has cooled down to approximately. LOCATIONS OF THE RADIANT SURFACE ELEMENTS AND CONTROLS The radiant surface elements are located on the cooktop as below. The radiant control key locations are same with radiant surface elements on the cooktop. single Left Rear element Warming zone single Right Rear element CAUTION • SURFACE ELEMENT CYCLES - When cooking on the surface elements it is possible for the element to cycle on and off during cooking. This will happen more frequently when a lower power is selected however it can also occur on higher settings as well. single Left Front element Dual Right Front Dual element -8-