LG LRE30451SW Owner's Manual - Page 14

Operation Options

Page 14 highlights

English OPERATION (OPTIONS) SETTING OVEN LOCKOUT FEATURE The START pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the Warming Drawer and most oven controls from being turned ON. It does not disable the clock, timer or the interior oven light. To activate the Oven Lockout feature: 1. Press and hold START for 3 seconds. 2. 2 beeps will sound, DOOR LOCKED will flash in the display. Once the oven door is locked the DOOR LOCKED indicator will stop flashing and remain on along with the lock icon( ) light. To reactivate normal oven operation: 1. Press and hold START for 3 seconds. A beep will sound 2 times. The DOOR LOCKED will continue to flash until the oven door has completely unlocked and the lock icon( ) light will clear. 2. The oven is again fully operational. CHANGING HOUR MODE ON C L O C K(12hr, 24hr) Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour time clock, follow the steps below. Changing between 12 or 24 hour time of day 1. Press and hold COOK & WARM pad for 3seconds. OPt will be displayed. 2. Press 1. The display will show CLO 12H. 3. Press 1 to switch between the 12H and 24H. 4. Press START to accept the desired change. SETTING TEMPERATURE UNIT - FAHRENHEIT OR CENTIGRADE COOK & WARM pad control the Fahrenheit or Centigrade temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Centigrade. The oven has been preset at the factory to display in Fahrenheit. To change display from Fahrenheit to Centigrade or Centigrade to Fahrenheit: 1. Press COOK & WARM for 3 seconds. 2. Press 2. The display will show Unit F. 3. Press 2 to switch between the F and C. 4. Press START to accept the desired change. SETTING BEEPER VOLUME The beeper volume feature allows you to adjust the volumes to a more acceptable volume. There are three possible volume levels. To set beeper volume 1. Press COOK & WARM for 3 seconds. 2. Press 3. The display will show BEEP Hi. 3. Press 3 to switch beeper volume ( Hi, Lo, and OFF ). 4. Press START to accept the desired change. Español - 14 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

- 14 -
English
Español
OPERATION (OPTIONS)
1.
Press
COOK & WARM
for 3
seconds.
2.
Press
3.
The display will show
BEEP
Hi.
3.
Press
3
to switch beeper volume
( Hi, Lo, and OFF ).
4.
Press
START
to accept the
desired change.
To set beeper volume
SETTING BEEPER VOLUME
The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
1.
Press
COOK & WARM
for 3
seconds.
2.
Press
2.
The display will show
Unit
F.
3.
Press
2
to switch between the
F
and
C.
4.
Press
START
to accept the
desired change.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
COOK & WARM
pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
1.
Press and hold
START
for
3 seconds.
2.
2 beeps will sound,
DOOR
LOCKED
will flash in the display.
Once the oven door is locked the
DOOR LOCKED
indicator will stop
flashing and remain on along with
the lock icon(
) light.
To activate the Oven Lockout feature:
1.
Press and hold
START
for 3
seconds. A beep will sound
2 times. The
DOOR LOCKED
will
continue to flash until the oven
door has completely unlocked and
the lock icon(
) light will clear.
2.
The oven is again fully operational.
To reactivate normal oven operation:
SETTING OVEN LOCKOUT
FEATURE
The
START
pad controls the Oven Lockout feature. The
Oven Lockout feature automatically locks the oven door,
prevents the Warming Drawer and most oven controls from
being turned ON. It does not disable the clock, timer or the
interior oven light.
1.
Press and hold
COOK & WARM
pad for 3seconds.
OPt
will be
displayed.
2.
Press
1.
The display will show
CLO
12H.
3.
Press
1
to switch between the
12H
and
24H.
4.
Press
START
to accept the desired
change.
Changing between 12 or 24 hour time of day
CHANGING HOUR MODE ON
CLOCK(12hr, 24hr)
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.